Requirements | |
---|---|
Compressed air requirements | 40-80 psi (3-5 bar) with 2 cfm (28.3 l/min) |
Water requirements | 10-100 psi (0.69-6.9 bar) |
Backflow prevention is required | Consult local plumbing ordinances for more information |
Liquid temperature range | 40-100˚F (4.4-37˚C) |
Chemical compatibility: Chemical products used with this equipment must be formulated for this type of application and compatible with unit materials and pump seals. For more information on chemical compatibility, consult the manufacturer or SDS for your product or contact our customer service department. |
Supporting Docs
Wall-Mounted Spray Unit
MD20017
Features
- Powered by compressed air
- Draws from concentrated product
- Dilutes product at ratios of 34:1 to 640:1 or 24:1 to 640:1, depending on fan tip used*
- Output distance:
- 10-12 ft. (3.0-3.7 m)
- Output volume:
- 2 gal/min (7.6 l/min) of liquid with ST2520 fan tip;
- 4-5 gal/min (15.1-18.9 gal/min) of liquid with ST2550 fan tip
- Flow rate:
- 2 gal/min (7.6 l/min) with ST2520 fan tip*
- 4-5 gal/min (15.1-18.9 l/min) with ST2550 fan tip
- Quick-change pump
- 50′ discharge hose with 1/2″ inside diameter
- Poly spray gun wand with fan tip
- Anti-kink hose protection
- Santroprene pump seals standard
*Dilution rates and flow rates given are based on chemical with viscosity of water and factory air pressure settings